• No Virus
  • No Spyware
  • No Bundle
  • No Adware

HP LaserJet Pro M201dw Driver (Windows)

HP LaserJet Pro M201dw Driver compatibility & system requirements for Windows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS.

HP LaserJet Pro M201dw Driver (Windows)

Type Driver-Product Installation Software
Version 15.0.16064.399
Operating system Windows (64-bit), Windows (32-bit)
Release date Oct 15, 2015
Filename LJ_Pro_M201-M202_Full_Solution_16064.exe
Size 99.7 MB

HP LaserJet Pro M201dw Driver Downloads and Software for Windows

Name Version Download
HP Universal Print Driver for Windows PCL6 (64-bit)
HP Universal Print Driver for Windows PCL6 (64-bit) for USB connected printers
HP LaserJet Pro M201/M202 series Firmware Update Utility 20180205

HP LaserJet Pro M201dw Cartridge & Toner:

  • HP 83X High Yield Black Original LaserJet Toner Cartridge
  • HP 83A Black Original LaserJet Toner Cartridge
  • HP 83A 2-pack Black Original LaserJet Toner Cartridges


Do not connect the USB cable to the device until prompted by the installer. If connecting to a network, make sure the network cable is connected before running the installation

  • Close all software programs running on the computer.
  • Turn on the printer.
  • Click the Download button on this page.
  • Click the downloaded file. The files will be extracted, and the installation process will automatically begin.
  • Follow the instructions on the screen to continue and complete the installation.

To install later, select Save in step 4 and select the location on your hard disk. When ready to install, search and double-click the file. This will automatically extract and start the installation process. Follow the instructions on the screen to continue the installation.

Method 1: Connect to a network and enable auto-discovery (Windows 8/8.1 just).

Windows 8/8.1 has an auto-setup function that is made it possible for by default for all computers and also printers on a small network with 30 devices or less.

NOTE: If your environment has greater than 30 devices, this function could be disabled. To enable this feature, contact your system administrator or IT assist desk.

When you initially connect the computer to a network, the operating system triggers you to enable Windows to uncover devices and printers on home and work networks. If activated, Windows immediately identifies the printer as well as downloads and sets up the appropriate HP driver software (where offered) for devices as well as printers. This needs that network is not composed of a domain which the customer has Administrator privileges.

If you already got this prompt and either pulled out or chosen a public network, avoid to Method two to by hand install from Windows Devices and also Printers.

If you already tried this Method, however, for some reason the driver did not immediately mount, or you experience one or more of the following scenarios:

  • Incapable of publishing.
  • Not able to check.
  • Loss of functionality.
  • The driver is not provided.
  • The driver is detailed however it does not function.

Method 2: Set up the driver now from Windows Devices and also Printers

Use this method to install the In-OS driver when the printer connected to a network with 30 or fewer devices, or if you do not have a net connection:

NOTE: If your atmosphere has more than 30 instruments, this feature may require administrator credentials. If so, contact your system administrator or IT help desk.

  • Connect the network cable to the printer.
  • Make sure that the printer IP address or hostname is readily available.

NOTE: If you do not recognize or have the printer IP address, print a configuration page that contains the printer IP address for directions sees the individual guide that came with the printer.

  • Open Devices and also Printers.
  • Discover the printer.
  • Select Add a printer.
    • In Windows 8/8.1, pick The printer I desire isn’t detailed while Windows is looking for readily available printers.
    • Select the Add a local printer… alternative.
    • Select Create a new port, choose HP Standard TCP/IP Port choice from the drop-down listing, and afterward accept Following.
    • Type the printer IP address (or Printer hostname) and also choose Following.
    • Select HP from the Manufacturer listing and afterward carefully scroll via the checklist to locate your printer.

NOTE: If your printer is not noted, see Approach three: Mount the driver utilizing Windows Update or when connected to a different subnet.

  • Select the printer driver and after that choose Following.
    Use the default or a brand-new printer name and after that pick Following.

NOTE: If prompted, pick Do not share this printer and after that pick Following.

  • Select Set as the default printer, and after that choose to Publish a test web page, or select Finish to complete the installation as well as close the window.

NOTE: If the examination page does not print, reboot the computer. If the concern continues, or if you desire much more printer attributes than the In-OS driver gives, see Method 3: Install the driver making use of Windows Update or when connected to a different subnet.

Recommended Post: HP LaserJet Pro M102w Drivers (Windows)

User Rating 0 (0 votes)

Tags: ,